If you’re new to tie-dye then you’re probably wondering if you need to tie-dye wet or dry. We have tested every method and are ready to reveal the results. Wet, dry, and damp all have their pros and cons that we will discuss below.
Your best bet is to tie-dye a slightly damp shirt. Damp fabric has multiple advantages over dry and wet. For starters, it is easier to fold and tie. It’s also easier to dye.
There are still reasons why you would want to tie-dye dry or wet depending on what you’re going for. It turns out that tie-dye is surprisingly versatile and there’s no wrong way to go about it. So what’s the difference between tie-dyeing a dry shirt vs a wet shirt?
Table of Contents
How to dampen a shirt properly
There are many ways to get your shirt damp. First you want to wet it, then remove excess water. You can wet your shirt in the washer, in a sink, or in a bucket.
The easiest way to dampen your shirt is to get it straight out the washer. The spin cycle of a washer gives your shirt a perfect humidity level. You want the shirt to be slightly damp all the way through. The water shouldn’t be dripping off the fabric.
You can also wring out your shirt by hand. It requires more force to get it to the right humidity level, but is doable. Another way to remove excess water is to hang the shirt for a little bit.
What if you tie-dye dry?
Folding a dry shirt
A dry shirt is stiff and hard to fold. Dry fabric is springy and doesn’t lend itself to folding. Dry fabric doesn’t hold its shape well and you can’t fold it as precisely. You need water to weight down the fabric and make it more malleable. It’s possible to fold a shirt when damp and let it dry before dyeing if you want to.
Dyeing a dry shirt
One advantage of dry fabric is the added control over dye placement. Dye that is placed on dry fabric will not spread nearly as much. The lack of spread limits the mixing of dyes when placed next to each other.
Dyeing a dry shirt is challenging. The first problem you will encounter is the lack of dye penetration. The dye has a tendency to bead up on dry fabric and doesn’t get readily absorbed.
There’s two solutions to help the dye penetrate easier. First, you can dampen the surface of the fabric with a spray bottle. Next, you can push the nozzle of your dye bottle directly onto the fabric.
What if you tie-dye damp?
Folding a damp shirt
Folding a damp shirt is ideal. It gives you control over the fabric. The water adds weight to the fibers and make them a little sticky. This let’s the fabric stay in place. This helps you precisely work on the shirt until you achieve the perfect fold.
Dyeing a damp shirt
There are many advantages to dyeing damp shirts. They have great dye penetration and manageable spread. Your colors will be smooth, consistent, and homogeneous.
Damp shirts are easy to dye. The water present in the fabric helps the dye penetrate. It makes it so the dye gets absorbed immediately as it touches the shirt. It also let’s the dye spread, for a more seamless mixing of colors.
What if you tie-dye wet?
Folding a wet shirt
Folding a wet shirt is not ideal. The excess water is more of a nuisance. The fabric is too heavy and doesn’t fold as well. The fabric will have a tendency to be sticky and crumble under its own weight. Also it puts water everywhere on your work table.
Dyeing a wet shirt
Wet fabric provides less dye penetration and increased spread. A shirt that’s too wet can be hard to dye with the color spreading on its surface uncontrollably.
Since the shirt can only contain so much water, a saturated shirt will have the dye stay on its surface and will prevent it from penetrating deeply. This can leave you with white spots, but can also be used to your advantage.
While damp shirts are easier to fold and dye, there are reasons why you may want to tie-dye dry or wet. Tie-dye is very flexible this way. There are no mistakes, only different techniques.
Experiment with different dampness levels to understand how the water plays with your folding and dyeing. You will discover your own preferences.